Electrical & Electronic Market Research Reports

Since the time of its beginning the electrical and electronic industry has been continuously developing and branching out at a very fast pace. This industry keeps on outlining a foreseeable development in many of the developing markets like Asia Pacific, Middle East and Latin America. The electrical and electronic industry is likely to be one of the most attractive center for global investment and has a high rate of return. The electrical and electronic industry is known for being one of the most significant economies in many countries over the globe. There is a consistent requirement for innovation and diversification in this sector.

India is a strong and growing economy and presents abundant opportunities for companies to enter into this market. The electronic and electrical industry in India is worth about 158 billion and has been estimated to reach about 400 billion by the year 2022. This industry has been growing at the rate of 25% every year. This industry is one of the fastest growing industries in India and its growth is driven by key sectors such as consumer electronics, IT and telecom. In the past year the electronic exports have been increased by 15 per cent. The main reason behind an increase in exports is an increase in the trend of contract manufacturing.

During the last few years India has experienced an abrupt inflation which has affected the electronic and electrical industry greatly. But now the economy has recovered to quite an extent. This will lead to an increase in the disposable income of the citizens of the country which will in turn lead to an increase in sales. The consumer electronics industry is largely going to benefit from online retail. India’s main advantage over other developed countries is that is has cheap and skilled labor and hence can produce various electrical and electronic products at a cheaper rate as compared to the developing countries. The demands of these products have increased mainly due to its cost effectiveness and technological improvements, these two are the main key drivers for demand.

This has attracted many giants to India. The Government of India has played a very important supporting role in this sector. The government has allowed 100 per cent foreign equity participation in this industry. It has also set up Special Economic Zones (SEZ’s) as well as Electronic Hardware Technological Parks which has created a conducive climate for foreign direct investment (FDI).

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 116

DBC (Direct Bonded Copper) substrates are composed of a ceramic insulator, Al2O3 or AlN onto which pure copper metal is attached by a high temperature eutectic melting process and thus tightly and firmly joined to the ceramic. Two of the world's largest manufacturers occupy for over 70% of global market share in 2018. Rogers/Curamik is the largest producer, and KCC Corporation is the second. In fu ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 118

Solid state transformer, also known as power electronic transformer (EPT), is a kind of electric power electronic transformation technology and electromagnetic induction principle based on the combination of high-frequency power conversion technology to achieve power characteristics of electricity into other Electric power characteristics of the static electrical equipment. The market of solid sta ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 113

IPM (Intelligent Power Module) is a high-performance module that mounts a dedicated drive circuit for drawing greater performance from an IGBT chip or MOSFET, and it provides a custom IC for executing self-protection functions (short circuit, supply under voltage, and over temperature). China’s Intelligent Power Modules (IPM) industry has developed into a national wide status with certain research ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 115

A mask is an original master for transferring IC patterns to the semiconductor wafers. Defects during lithography that exceed expected size must be identified and corrected. Semiconductor devices are manufactured using photomasks, which serve as the source of original patterns for integrated circuits. 2019 is expected to be a challenging year for the semiconductor industry mainly due to macroecono ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 128

IC substrate is a type of carry material for integrated circuit with internal circuit to connect the chips and PCBs. Additionally, the IC substrate can protect the circuit, special line, it is designed for heat dissipation and acts standardized module of IC components. It is one of the most key materials of the IC packaging, and the share of IC substrate for IC packaging is as high as 35-55% Japan ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 117

Angle of Attack (AOA) Sensors are used in aerospace to measure the performance status of an aircraft during different flight stages. The Angle of Attack (AOA) Sensors market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast peri ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 118

Scan Lenses are used for Laser Marking, Engraving, and Cutting Systems etc fields. The Scanning Lenses market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Scanning Lenses. This study ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 115

Tube Lenses are optimized for laser scanning applications, such as confocal laser scanning, two-photon microscopy, and three-photon microscopy. The Tube Lenses market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to e ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 110

Industrial Ultrafast Lasers are ideal for ultra-fine processing of materials with little or no heat affected zone (HAZ). Target materials for these lasers include glass, OLED, IC packages/wafers, and flexible thin films. The Industrial Ultrafast Lasers market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this ...
View More

 Jan-2019 | YQ Research | Semiconductors | Price : $2900.00 | Pages : 122

The Electronic Health Scale market was valued at xx Million US$ in 2018 and is projected to reach xx Million US$ by 2025, at a CAGR of xx% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Electronic Health Scale. This study focuses on the production side and consumption side of Electronic He ...
View More
Latest News

25-Feb-2019 | ICT and Media

Fed Says Due To Surged Financial Volatility, US Labor Market Tightens

Recently, in its new report on the economy, the Fed (Federal Reserve) said that labor market is tightened in the U.S. as businesses are struggling to find workers at any expertise level and wages usually grew moderately. The Fed’s “Beige Book” report—which is a picture of the economy picked up from conversations with business contacts—reported that stiff labor m ...

25-Feb-2019 | Electrical & Electronic

Global Battery Material Market Finds A Ray Of Hope In The Structural Battery

Batteries are generally made using lithium or others ions which are not only harmful to the environment but also difficult to find or manufacture. However, a team from the University of Michigan has successfully developed a new material for batteries stating that the knees and smartphones have similar needs. The structural battery prototype possessing cartilage-inspired materials can actuall ...

13-Feb-2019 | Electrical & Electronic

Absolute Regulation Would Motivate The Growth Of UAV Market

The drone industry will grow rapidly with increased use of drones in areas such as agriculture, mining, construction, resource exploration, and supervision. By 2018, drone companies have begun to expand their scope and determine the feasibility of a drone program by reorganizing their workflows and managing the data. This year, companies are expected to focus on their strategies and benefit ...

13-Feb-2019 | Machinery & Equipments

Acquirement of Structured Polymers By Evonik To Bring New Opportunities In 3D Printing Materials Market

Evonik has procured a tech startup based in the United States for 3D printing materials: Structured Polymers Inc. A conforming agreement and plot of the merger were accomplished and the deal has been sealed recently. The procurement will offer access to Evonik to the new patented technology that will enable the firm to extend its range of specialty polymer powders within the additive manufac ...

05-Feb-2019 | Medical & Health

A New Sensor Platform Opens Up Diverse Doors For Smart Medical Devices Market

Recently, a group of researchers from the University of Bath and Northwestern University has produced the latest type of sensor platform with an array of gold nanoparticles. The sensors are believed to have a vital role to play in the field of smart medical devices market in order to help make sensitivity related tasks simpler as well as quicker for the medical staff.